SICK CLV490 Instrukcje Operacyjne Pobierz pdf (Strona 202)

Chapter 10 Operating Instructions

CLV490 Bar Code Scanner

Appendix

10.3 Installing and operating the external parameter memory

(connector cover)

The external parameter memory is available as an accessory. It is located in a connector

cover and comprises a permanent, rewriteable memory (EEPROM) with 4 kByte from

CLV490 firmware V 2.0. The connector cover covers the two connections of the CLV490 in

the enclosure rating IP 65. The cover is shown in Fig. 10-32. Depending on the type, two

(one) connection cable(s) that are secured by means of conduit thread connections supply

the signals of the CLV490 with identical pin assignment or limited pin assignment.

Note If the CLV490 is used to replace a CLV 265/CLV 295 equipped with a connector cover (pa-

rameter memory), the CLV490 cannot store its extensive parameter set in this external pa-

rameter memory (too small).

The parameter memory in the connector cover is available in different implementations:

Fig. 10-32: External parameter memory, installed on the CLV490

22

(0.86)

22

(0.86)

88.5

(3.48)

50 

(1.79)

27

(1.06)



27

(1.06)



Order no. Design CLV490 Length Connection

2030023 Connector cover, one connection cable with 15-pin D Sub HD

plug. Pin assignment see Chapter 5.3 Connector pin assign-

ment, Page 5-7.

Without

heater

3 m (9.84 ft) CLV490 to CDB420

2033126 Connector cover, one connection cable with 15-pin D Sub HD

plug, one power supply cable with open end. Suitable for track

chain use. Pin assignment see Chapter 5.3 Connector pin assi-

gnment, Page 5-7.

Without

heater

10 m (32.8 ft) CLV490 to CDB420

2033127 as 2033126, but with longer cables Without

heater

10 m (32.8 ft) CLV490 to CDB420

2020307 Connector cover, two connection cables with 15-pin D Sub HD

connections (1 x plug/1x socket).

Pin assignment see Chapter 5.3 Connector pin assignment,

Page 5-7.

Without

heater

3 m (9.84 ft) CLV490 to CDM490

2020981 Connector cover, two connection cables with open ends.

Pin assignment see Chapter 5.3 Connector pin assignment,

Page 5-7.

Without

heater

3 m (9.84 ft) CLV490 to non-Sick

Power pack, free wiring

2030065 Connector cover, two connection cables with 15-pin D Sub HD

connections (1 x plug/1x socket) and one power supply cable

with open end. Suitable for track chain use. Pin assignment see

Chapter 5.3 Connector pin assignment, Page 5-7.

With

heater

3 m (9.84 ft) CLV490 to CDM490

2031 034 as 2030065, but with longer cables With

heater

10 m

(32.8 ft)

CLV490 to CDM490

Table 10-4: Types of the external parameter memory in the connector cover

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 269 270

Komentarze do niniejszej Instrukcji

Brak uwag

SICK CLV490 Instrukcje Operacyjne Strona 202

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Czytniki kodów kreskowych SICK CLV490